Reggie
MEMBER
- Joined
- Jul 2006
- Messages
- 1,099
Thanks for the compliment Sam.
I do have indicators. They are "Motogadget M-Blaze Pin LED Turn Signals (Black) (EC) (6004010)" They're very small, about the the size of two joints on my little finger and that includes the thread. They are also very bright, but have to be fitted in the correct position to get the "brighter" part of the flasher pointing in the correct direction (which wasn't in the instructions), and they need a load resistor fitting into the circuit.
On my Norton they are fitted in the original correct positions but are so small, and are black and clear when not flashing, that they're not at all obvious unless your looking closely.
Out of interest, when fitted the LED indicators to the headlamp ears, they weren't far enough apart to meet MOT regs, so I had to fit 2 X extension pieces that are also black, although without checking, I can't remember what the minimum distance required is.
www.arhcustom.co.uk
I do have indicators. They are "Motogadget M-Blaze Pin LED Turn Signals (Black) (EC) (6004010)" They're very small, about the the size of two joints on my little finger and that includes the thread. They are also very bright, but have to be fitted in the correct position to get the "brighter" part of the flasher pointing in the correct direction (which wasn't in the instructions), and they need a load resistor fitting into the circuit.
On my Norton they are fitted in the original correct positions but are so small, and are black and clear when not flashing, that they're not at all obvious unless your looking closely.
Out of interest, when fitted the LED indicators to the headlamp ears, they weren't far enough apart to meet MOT regs, so I had to fit 2 X extension pieces that are also black, although without checking, I can't remember what the minimum distance required is.
Motogadget M-Blaze Pin LED Turn Signals (Black) (EC) (6004010) | ARH Custom UK
Buy Motogadget M-Blaze Pin LED Turn Signals (Black) (EC) (6004010)
Last edited:
