Gearbox fluid Capacity?

Joined
Jan 4, 2007
Messages
105
You know I have run into many typos in the factory manual that I thought it would be best to ask what the correct amount of Gearbox oil we should be putting in.
The Manual says .9 US pints or 420cc....is this correct?
Thanks,
Eric
 
Joined
May 7, 2005
Messages
5,950
Country flag
There is a level hole, I just add oil umtil it comes out the hole, never measured what goes in.
 

maylar

VIP MEMBER
Joined
May 13, 2007
Messages
4,139
Country flag
You can see the level hole bolt from the inside while the inspection cap is off. Fill slowly until the level reaches the bottom of the bolt. No need to remove the bolt and let oil dribble down the gearbox.
 
Joined
Aug 21, 2006
Messages
748
Country flag
Commando74 said:
You know I have run into many typos in the factory manual that I thought it would be best to ask what the correct amount of Gearbox oil we should be putting in.
The Manual says .9 US pints or 420cc....is this correct?
Thanks,
Eric

That sounds about right. My manual also says 14.4 fl oz if that is more convenient.
 
Top