Pazion Sure Fire hobot Truth or Dare

I can tell by the begining slight hestitaions to settle down to a dead idle that [current] Trixie Combat's AAU is begining to show its age. I have nothing bad to say about Boyer but I'll never go back to em on a Combat.

Here's the deal, neither Wes nor I, both with 1st time successes on Boyer installs and contact breakers could not get Pazion Sure Fire to fire but for brief instants then nothing at all even with the half dozen tests showing all electrics just fine. I have heard of one or two mis-fits mechanically in trigger gizmo stifling the Sure Fire so need to find out if that is the case with my and Wes's failure. So I ask if some vigorous curious Sure Fire runner with time to spare would try mine out to see if its just me and Wes or the make and fit of Pazion on the cam taper. If it works then I'll write instruction on boot upside down of course to read it.

[video]http://www.youtube.com/watch?v=1W-eFlysiN8[/video]

Many people have put mixed up the trigger wire by putting the w/b wire on the y/b terminal and the y/b wire on the w/b terminal. This makes a world of difference. This I know.

The SureFire has been my goto unit when all else fails.

I assume you have single, dual output 5k ohm coil?