Fuel delivery for Mikuni conversion

Joined
May 27, 2005
Messages
19
Hi all. Well, the cafe racer is well on the way. Now, some advice please... Does anyone know what the set-up should be for the twin taps running into one for the Mikuni. Is it some sort of T section/junction? Is there a part made for this? I figure it must be easy, after all I hear of many Mikuni conversions.
Can anyone advise please?
 
Joined
Aug 14, 2006
Messages
1,451
Mine is just a simple brass (I assume it's brass) T connector.
 
Joined
Aug 21, 2006
Messages
748
Country flag
Snagger said:
Hi all. Well, the cafe racer is well on the way. Now, some advice please... Does anyone know what the set-up should be for the twin taps running into one for the Mikuni. Is it some sort of T section/junction? Is there a part made for this? I figure it must be easy, after all I hear of many Mikuni conversions.
Can anyone advise please?

a simple 1/4 ID diam T-connector from any hardware store will work. Make sure you include an inline fuel filter after the T-connector and before the carb as Mikunis do not have any filtration at all
 
Top