Fuel delivery for Mikuni conversion

Status
Not open for further replies.

Snagger

Joined
May 27, 2005
Messages
19
Hi all. Well, the cafe racer is well on the way. Now, some advice please... Does anyone know what the set-up should be for the twin taps running into one for the Mikuni. Is it some sort of T section/junction? Is there a part made for this? I figure it must be easy, after all I hear of many Mikuni conversions.
Can anyone advise please?
 
Mine is just a simple brass (I assume it's brass) T connector.
 
Snagger said:
Hi all. Well, the cafe racer is well on the way. Now, some advice please... Does anyone know what the set-up should be for the twin taps running into one for the Mikuni. Is it some sort of T section/junction? Is there a part made for this? I figure it must be easy, after all I hear of many Mikuni conversions.
Can anyone advise please?
Click to expand...

a simple 1/4 ID diam T-connector from any hardware store will work. Make sure you include an inline fuel filter after the T-connector and before the carb as Mikunis do not have any filtration at all
 
Status
Not open for further replies.
Back
Top