Lineslinger
VIP MEMBER
- Joined
- Feb 26, 2017
- Messages
- 1,665
Some background:
I reached out in a previous thread I started on custom cable kits seeking an improved/better/make me quit bitching about the synchronization of the twin Amals on my bike.
I had already installed a new cable setup with new junction "boxes" during restoration and was still getting frustrated in dealing with the carbs matching/synchronizing.
I could get them very close but it seemed tweaking was always a mandate. I pulled the head for an overhaul (that's one for another thread) and with the carbs off decided to try to fix the sync issue I was having.
Cliffa reached out in the "Cable Kit" thread and turned me on to an offering from Madass.
After reviewing some photos I decided to make the purchase and emailed Mr. Pendor.
He was very helpful with info and shipping was fast. I spaced out on the time difference from across the pond and emailed him at 3AM his time and he still responded within a few minutes.
The kit he has developed is very well thought out IMHO. The application and adjustments allow for very finite adjustments without any "dainty" issues, very solid
No, Mr. Pendor did not comp me or pay me to plug his piece. I found it to be a viable improvement and well made, thus sharing here.
Maddas140 single throttle cable linkage
Don Pender: madass140@gmail.com
I thought it might be of interest to some to see photos of the adapter plate mating up with the carbs. I have yet mount it on the engine and will follow up with more when I do.
I reached out in a previous thread I started on custom cable kits seeking an improved/better/make me quit bitching about the synchronization of the twin Amals on my bike.
I had already installed a new cable setup with new junction "boxes" during restoration and was still getting frustrated in dealing with the carbs matching/synchronizing.
I could get them very close but it seemed tweaking was always a mandate. I pulled the head for an overhaul (that's one for another thread) and with the carbs off decided to try to fix the sync issue I was having.
Cliffa reached out in the "Cable Kit" thread and turned me on to an offering from Madass.
After reviewing some photos I decided to make the purchase and emailed Mr. Pendor.
He was very helpful with info and shipping was fast. I spaced out on the time difference from across the pond and emailed him at 3AM his time and he still responded within a few minutes.
The kit he has developed is very well thought out IMHO. The application and adjustments allow for very finite adjustments without any "dainty" issues, very solid
No, Mr. Pendor did not comp me or pay me to plug his piece. I found it to be a viable improvement and well made, thus sharing here.
Maddas140 single throttle cable linkage
Don Pender: madass140@gmail.com
I thought it might be of interest to some to see photos of the adapter plate mating up with the carbs. I have yet mount it on the engine and will follow up with more when I do.
Attachments
-
L1150470.JPG150.3 KB · Views: 975
-
L1150615.JPG126.7 KB · Views: 988
-
L1150616.JPG115.9 KB · Views: 964
-
L1150618.JPG90.1 KB · Views: 935
-
L1150631.JPG91.9 KB · Views: 1,006
-
L1150464.JPG79.3 KB · Views: 935
-
L1150467.JPG99.6 KB · Views: 897
-
L1150461.JPG64.1 KB · Views: 892
-
L1150628.JPG91.8 KB · Views: 711
-
L1150634.JPG104.4 KB · Views: 681
Last edited: