1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

several noob questions - mounting on the RH support plate, rear brake cable routing...

Discussion in 'Norton Commando Motorcycles (Classic)' started by joe czech, Mar 23, 2019.

  1. L.A.B.

    L.A.B. Moderator VIP MEMBER

    Nov 20, 2004
    Yes, but it will still be the same as it is now.
  2. joe czech

    joe czech

    Feb 21, 2019
    hate to disagree with the factory, but....

    my cable was routed as outlined above and I have severe chaffing in several locations. the rub factor is or was so bad, that it wore a groove in the footpeg spacer as well as wear to the muffler bracket in a couple locations. in one spot, it wore through the cable's black sleeve and is starting to wear into the inner steel liner. now, I can't say for sure if my brake cable is the factory original, but my cable reroute behind the bracket appears to have less contact with the bracket(s). again, thanks for the service bulletin.

Share This Page