(qty. 4) 8mm x 1.25 pitch x 170mm length hex bolts , 18-8 stainless mount bolt
(qty. 4) Flat washers 8mm ID small to go under long bolt heads.
(qty. 4) 100 mm length aluminum spacers 5/16" ID (8mm) x 3/4" OD (19mm) - Or some combination of spacers equaling 100mm per bolt
(qty. 4) 8mm x 1.25 pitch flange nuts serrated 18-8 stainless - you can use the Norton OEM nuts already on it , I wanted to double jam nut it.
(qty. 2) Norton OEM Front Motor Mount plates p/n 6070017_R1
(qty. 2) Folding footrests of your choice available on Ebay or Amazon - I used Neverland Brand which are good quality and come with bolts.
(qty. 4) Flat washers 8mm ID to cover the large holes in the motor mount plates that the footrests will bolt to.