Norton 961 Alternate parts list.

Bluey72e said:

FUEL PUMP
Bosch 69613 (0 580 453 407) It requires a 1/2" tubular spacer - the white piece in this image.

Hi @cliffa Ive ordered the fuel pump but cant seem to locate the "image" you refer too for the 1/2" tubular spacer ?? whats that for ??

My 2015 has stared to be unrealiable when starting as the fuel pump seems to either fire up or not.

Thanks

Click to expand...

cliffa said:

Hi @Bluey72e,

have a look at page 1 of this thread and you can still see it. ( I keep this thread updated in parallel). I have no idea why the spacer is required TBH, as this was info. recieved. It would be good if you could give some feedback as to why (or if) it's actually required?
Bear in mind, If it is required, you will need to find something which does not dissolve in petrol !!

P.s. have you checked that you don't have a loose or cracked fuse? ( It has been known )

Click to expand...

City Garage said:

We will add what we can

Fuel Pump O-ring McMaster Carr # 1295N668 Chemical-Resistant Viton® Fluoroelastomer O-Ring 5 mm Wide, 90 mm ID

Fuel Pump- Complete unit can be sourced from Ducati or Aprilia

Fuel Filter- MAHLE Original KL 145

Fuel Pressure Regulator can be sourced from Ducati (28340031A) or Aprilia but the cheapest we found was here at CA Cycleworks Make sure you have the right pressure setting. 3.5 bar

961 Original Stator Alternator Generator/with Crank Sensor Elextrex World - OEM 5300003 - G961

TPS- cts 04tp002

Fuel Injector - Intermotor FJ647 is a good replacement and can get at most auto parts

Idle Air Valve - Lowe 57177

Carbon Fiber repairs on chain guard - Twill weave is what you want


Flasher Relay- We change them to adjustable so they work with LED like this one here 12V Speed Adjustable 2 Pin Direct Replacement Compatible LED Electronic Flasher Relay


Also there are at least 3 wiring diagrams that are out there but there may be more since we have run across non matching diagrams

And should there be a map room for those of us that have maps or have modified maps that work for certain units?

Click to expand...

nigellmann said:

Part numbers for built in clutch and brake master cylinder lids the coffin shape 110270443 and 110430860 Ducati

Click to expand...

cliffa said:

Thanks for this @nigellmann. To be honest mine look the same on both sides. Is there a difference?

Click to expand...

TonyA said:

Hi Cliffa , If I understand the size of brake and clutch reservoir and different. The brake being larger , again this is for the casting style that my Sport came with. Those should be good numbers for these bikes.

Click to expand...

TonyA said:

Cliffa , Don’t you have remote reservoirs ?

Click to expand...

cliffa said:

Thanks for this @nigellmann. To be honest mine look the same on both sides. Is there a difference?

Click to expand...

nigellmann said:

Different size on my 2016 brake one is larger

Click to expand...