What Did You Do With Your Commando Today?

robs ss said:
I think he must be talking "adjustment holes" - if so, multiply those numbers by 6 (6 thou per hole based on thread pitch)
Cheers
Click to expand...
Correct Rob. I compared 0.5 hole (0.003”) increments which were noticeably different. I abandoned any attempt to use a feeler gauge for two reasons really.
1. Placing the gauge at different points gave different readings
2. Sometimes the gap is only on one side sometimes both basically making it an unreliable faff which is why the vernier was developed in the first place of course.

Still, my bike isn’t as smooth as a mate’s 850 but then again his rubbers will be different and maybe setup for a smoother ride. I had mine at 3.0 holes (front) at one point at above 3k was ‘rotary’ smooth obviously at some cost to the handling feel and if I may say, a tad ‘modern bike’ feeling😬

It’s occurred to me that seeing how easy and quick any adjustment is, should I want a smoother high speed ride, say a long motorway cruise (I might be going on next years INOC Rally in Italy, 1300 miles each way) then I could dial that it, just a thought.
 
dimchick said:
Installed turn signals (1970, came without them), did the wiring, ripped some old DIY wiring from the previous owner, found out the horn works - was just wired wrong, new LH switch, drilled and installed tiny LED warning lights for new turn indicators, new chain, new speedo drive, checked tappets, installed Corbin seat.
Click to expand...
Looks great. My commando is a 70 model also. When I had it with a roadster tank and side covers I learned that you can't have a fob on your key or it will whip around in the wind and scratch the paint off your side cover.... Just giving you a head's up since your bike's paint looks so nice...
 
o0norton0o said:
Looks great. My commando is a 70 model also. When I had it with a roadster tank and side covers I learned that you can't have a fob on your key or it will whip around in the wind and scratch the paint off your side cover.... Just giving you a head's up since your bike's paint looks so nice...
Click to expand...
Thank you!!!! I was looking at the little keychain the previous owner had on the key and figured that was going to happen, so I took it off!
Thank you!
 
My side stand has some considerable wear thanks entirely to the previous owner kick starting it whilst deployed, even on his YouTube video. A friend says he can easily add weld to build it back to original profile or more for that matter to fix the excess lean angle. Thankfully the frame lug is in much better shape, just as well as there’s no way I’d want that kind of heat applied.
What Did You Do With Your Commando Today?
What Did You Do With Your Commando Today?



Unfortunately whilst removing it I spotted this:
What Did You Do With Your Commando Today?

Bugger, the repair has failed and it’s worse than before. I swapped the silencers over so as to hide the previous repair so it not down to poor isolation. The other side remains perfect.

I’ll show it to the guy that repaired it but I rather think I’m in for a replacement from Matt (won’t be cheap) which may encourage me to replace the badly pitted (aesthetic only) headers at the same time. He’s told me he’ll soon have stainless headers but I’m concerned they might go the same way.

Anyway to cheer me up I went for a nice ride in 27 degrees on the North Wessex Downs
 
No Nortons are bullet proof why they been going for so long, I was out on mine Sunday don't even carry tools, was out all day but for Sunday the traffic was so bad no matter where I went but the only time I didn't take my small screw driver for minor carb adjustments, normally in my jacket pocket and you wouldn't believe it one carb just wouldn't idle, but the bike ran great just had to hold on to the throttle a we bit when stopped at lights, the bike didn't miss a beat when I opened it right up in 2nd and 3rd, love the big spark from the JH just open it up and it just takes off and even better when the cam kicks in, but got to do something with my mufflers as they are a wee bit loud, might have to order some new cocktail shakers, the baffles are goneeee after 30+ years on the bike.
Dropped by a mate's place and he heard me coming down the road, told me it sounded great as I stuck it into it before slowing for his driveway and gave it a hand full on his grave driveway, bloody showoff lol.

Ashley
 
robs ss said:
I think he must be talking "adjustment holes" - if so, multiply those numbers by 6 (6 thou per hole based on thread pitch)
Cheers
Click to expand...
Ok, but why would "adjustment by hole" be affected by being on the centre stand vs just propped up?
I've also being playing with these adjusters, in-between fitting some new Oxford bar end mirrors and an adjustable brake lever (Brembo master cylinder)
Good results so far, I can now see behind me and the brake lever is much better.
 
SteveBorland said:
Ok, but why would "adjustment by hole" be affected by being on the centre stand vs just propped up?
I've also being playing with these adjusters, in-between fitting some new Oxford bar end mirrors and an adjustable brake lever (Brembo master cylinder)
Good results so far, I can now see behind me and the brake lever is much better.
Click to expand...
Being on the centre-stand has no bearing on whether you use a feeler gauge or the "counting holes" method.
It is just, in my view, bad practice. On the centre-stand the whole rear of the bike is being propped up by the rear iso. That is very likely to distort the rubber inner giving a "bad" reading, whichever method you use.
Cheers
 
robs ss said:
Being on the centre-stand has no bearing on whether you use a feeler gauge or the "counting holes" method.
It is just, in my view, bad practice. On the centre-stand the whole rear of the bike is being propped up by the rear iso. That is very likely to distort the rubber inner giving a "bad" reading, whichever method you use.
Cheers
Click to expand...
I don't have a side stand on mine, so it's always parked on the centre stand. I wonder if this has squashed the iso rubbers?
It's a real bugger of a job to replace them, so I doubt that I'll pull them just to have look though!
 

Similar threads

Schwany
What did you do with your P11 today. he he
2 3 4 5 6
Replies
103
Views
14,293
Schwany
Schwany
Shelby-Right
What did you do with your Triumph today .
Replies
10
Views
2,012
Matt Spencer
M
CanukNortonNut
  • Locked
Ok what are you getting for mileage with your commando.
2 3 4 5
Replies
93
Views
17,723
CanukNortonNut
CanukNortonNut
V
What did you do to your Norton today?
2 3 4
Replies
67
Views
10,626
Richard Tool
Richard Tool
Back
Top