chasbmw said:What size socket is required for the fork top nut?
The damper rod bolt seems to require a thin walled box spanner, again what size please.
Many thanks
Charles
hobot said:15/16"
chasbmw said:The damper rod bolt seems to require a thin walled box spanner, again what size please.
hobot said:I use 15/16" 3/4" drive socket with about 1/16" bench grinder off outer rim about 3/4" wide for the fork top bolts, as threads on outside not inside like a nut, unless counting the damper rod threaded hole, so its both a nut and a bolt, not just a hollow bolt like the exhaust ring 'nuts'.
L.A.B. said:hobot said:15/16"
1-5/16" A/F (1 inch and five sixteenths, not 15/16")
chasbmw said:The damper rod bolt seems to require a thin walled box spanner, again what size please.
Do you mean the damper tube bolt (1/2" A/F hex) ? Or damper rod nut?