- Joined
- Oct 28, 2009
- Messages
- 1,226
I am about to install the Norton Full Flow Oil Filter Kit 064283 on my 1972 Norton Commando.
The bike never came with an oil filter, so I will need to drill the cradle for the mounting bolts.
The kit comes with dimensions to locate the holes to be drilled, described here:
http://www.norvilmotorcycle.co.uk/techtalk13.htm
Has anybody installed the kit using the instructions/dimensions?? And do these dimensions work out right??
I have seen some posts where folks complain about the swing arm hitting the oil filter.
And other folks complaining how they can't fit the Kegler swing arm collars because the oil filter is in the way.
It sounds kind of tight and I would prefer not to have to "move" the holes around afterwards.
Stephen Hill
Victoria BC
The bike never came with an oil filter, so I will need to drill the cradle for the mounting bolts.
The kit comes with dimensions to locate the holes to be drilled, described here:
http://www.norvilmotorcycle.co.uk/techtalk13.htm
Has anybody installed the kit using the instructions/dimensions?? And do these dimensions work out right??
I have seen some posts where folks complain about the swing arm hitting the oil filter.
And other folks complaining how they can't fit the Kegler swing arm collars because the oil filter is in the way.
It sounds kind of tight and I would prefer not to have to "move" the holes around afterwards.
Stephen Hill
Victoria BC