handlebars

I need to replace the handlebars on my 74 Roadster after having laid it down a couple months ago. I ordered the "US" bars from Old Britts and found them to be about an inch lower than what I had on there. I've owned the bike since new and can't recall ever having changed the handlebars from stock. (Well, there was a short time in the 70's when I had pullbacks, but they went away quickly).

I'm only aware of 3 choices of bars on a Commando - US, European, and Hi Rider. Does anyone know if there are differences in what the various Brit vendors sell for the same part number?

I got a set from Walridge, and too, they were about 1" shorter rise. Kind of between the Home (Euro) and Export (my originals). I saw that Phil at FS had a set of stainless for about $90. I don't know if they are any different. I don't mind the look though. Good Luck, they are probably all made by the same people unless you get the Emgo ones.

Dave
69S

I've had the euro bar on mine for a long time. Easier on the old back when you hit a pothole. I still have the original US bars stored away if you need unbent measurements. Maybe hard to find a close generic bar due to the long straight sections for the levers.