Shoot, I don't know what do you think?Hi, it’s been a long time since I logged on. What are you thinking on the rotor and caliper?
Shoot, I don't know what do you think?
Why just one?
The swing arm I have had brass bearings in the arm.
I just knocked them out and they appear to be in ok shape.
How bad do they need to be to need replacing?
The swing arm was (is) in such bad shape, I just assumed that it would be better to have new bushings while it’s apart.They should be sintered bronze ('Oilite').
https://www.bowman.co.uk/bearings/oilite-bearings-self-lubricating-bearings
Why then, did you remove them?
The bushes/bushings should be a tight fit in the swingarm as they move with the swingarm around the fixed (to the cradle) spindle.
The swingarm doesn't pivot on the bushes if that was perhaps what you were thinking?
Without the swingarm spindle and bushes in position then it's difficult for anyone to say.
I’m sure this has been covered many times before, but my search came up with nothing that I need.
From 14:12
Now I’m going to search for your video on how to install new ones.
They're not my video(s).
Note that the replacement front Isolastic is the vernier conversion kit:
Please don't blast your cases with anything other than baking soda
If you bead blast them etc you will never be able to remove all the glass beads