Boyer Power box

Status
Not open for further replies.
Joined
Apr 19, 2011
Messages
328
Okay I read the previous thread way back on sparx set up and joining brown/blue wires at Zener Diode and where the 2MC capacitor hooked up.
I have fitted up the Boyer power box with the extra white wire to work the charging light. When I remove the WLA, do I need to connect up some of these wires?
I have lights and most ancilliaries, but no power to coils?

Cheers Richard
 
I assume you connected the white Power box wire to white/brown?

If so, then the other WLA wires (green/yellow and red) can be disconnected and taped up.
Fitting a Power box should not have resulted in the power supply to the ignition being cut off, (assuming it's points ignition?) so there appears to be a separate problem?
 
Status
Not open for further replies.
Back
Top