laurentdom said:Hi Xavier,
Hope it can help: In most of french industrial hardware shops selling belts, pulleys etc... you can have your belt made to order, much cheaper and of as good quality as those got from Norvil, RGM ... and other Norton parts providers.
Yours should be of AT10 profile, which is a standard one. It means that a 980 millimeters long belt has 98 teetht(one per centimeter).
Mine on my Dominator is a AT10 / 27 mm wide.
Back to your problem: too tight /misaligned / rubbing against something?
Bonne chance
Laurent
Salut Laurent,
Norvil belts are htd profile... And mine is 896mm long , which complicate everything, cause it's quite hard to find !