- Joined
- Nov 20, 2004
- Messages
- 20,106
Thanks Dave and Olympus, the only reason I ask is because I have ordered a pair of premiers from Classic Bike Spares in Aus, and was told that the standard main jet is a 200.
200 according to Amal's information, 230 according to the Mk3 manual and riders manual.
Edit: 220 according to the Mk3 parts book.
When I took the original carbs off the bike, they also had 200 mains installed (I’ve only had the bike for a short while) so I’m wondering if the fuel here is different.
What are the carb numbers (LH and RH - 932/??)?
I’m using 95 Ron fuel ( no ethanol) the bike is a stock standard Mark3 with a ham can and points but I intend to change to a Pazon Altair soon.
A "ham can" isn't standard and what about the silencers/mufflers as the original black caps/bean cans usually get replaced with peashooters, etc.?
If so, then there's a good chance 200 is going to be too weak.
Last edited: