Amal Premier question

MikeG

VIP MEMBER

Joined

May 31, 2012

Messages

1,286

• May 9, 2024

• #1

Can anyone tell me the wrench size of the jet holder in a Amal premier? It can be reached through the bowl drain for attention but not seen without dropping the bowl.

 

8

850 Sam

Joined

Aug 17, 2006

Messages

19

• May 9, 2024

• #2

from the Amal web site technical page

A 5/16 BSF or 1/4 Whitworth spanner is required to undo and remove the jet holder from the bottom of the carburetter body.

 

Peter R

VIP MEMBER

Joined

Dec 13, 2010

Messages

512

• May 9, 2024

• #3

8mm socket with 1/4"square works for me.

 

L.A.B.

Moderator

VIP MEMBER

Joined

Nov 20, 2004

Messages

20,275

• May 9, 2024

• #4

Peter R said:

8mm socket with 1/4"square works for me.

Click to expand...

That's the main jet size (or more likely 2BA spanner size), not the jet holder.

 

Peter R

VIP MEMBER

Joined

Dec 13, 2010

Messages

512

• May 11, 2024

• #5

I stand corrected.