Wiring help needed :)

gatsby · Dec 30, 2022

Hi,

Looking for some direction on this wiring set up.

-3 Phase Lucas Stator
-3 phase Lucas Rectifier / Regulator
-New Lucas Harness
-Positive earth

Three wires from Stator into harness as in picture?

Do I double join a 2 yellow wires from the Rectifier / Regulator into the green yellow or white green in the wiring harness (and other two are pos / neg).

Thanks!

Gatsby

L.A.B. · Dec 30, 2022

gatsby said:
Do I double join a 2 yellow wires from the Rectifier / Regulator into the green yellow or white green in the wiring harness

No, connect each reg/rec yellow directly to a stator wire.

gatsby · Dec 30, 2022

L.A.B. said:
No, connect each reg/rec yellow directly to a stator wire.

And delete one yellow from the Reg/rec?

L.A.B. · Dec 30, 2022

gatsby said:
And delete one yellow from the Reg/rec?

No, it's a "three-phase" stator and reg/rec.
Same connections as for 3-phase Podtronics:

gatsby · Dec 30, 2022

L.A.B. said:
No, it's a three-phase stator and reg/rec.

Ahh - a new 3rd wire must be run (aside from the stock Lucas loom fabric) from the Stator to the Reg/Rec. Correct?

L.A.B. · Dec 30, 2022

gatsby said:
Ahh - a new 3rd wire must be run (aside from the stock Lucas loom fabric) from the Stator to the Reg/Rec. Correct?

Yes, although depending on where the reg/rec is to be located the reg/rec wires could be connected directly to the stator wires (plus one wire connection to harness GY for the assimilator?).

gatsby · Dec 30, 2022

Got it! Electrical has always been a weak point for me. Thanks again LAB!

Wiring help needed :)

gatsby

Attachments

L.A.B.

Moderator

gatsby

L.A.B.

Moderator

gatsby

L.A.B.

Moderator

gatsby

Similar threads