Triumph T160 Brakes

My rear brake on my 75' T160 is getting new seals now. Can anyone tell me what the push rod travel measurement should be about? As I was taking it apart the rod & nuts are corroided so I'm going to clean them up. I don't have a service manual for this model. I've already removed the nuts and didn't take any measurements.

TIA,

Tim

Google "lockheed norton" and you should get the procediure. The brake master cylindersw are ultra-critical for proper re-assembly & adjustment.

= 8.9 - 9.4mm

Lockheed Service Manual: http://www.classicbike.biz/Triumph/Main ... Norton.pdf

Tim_S said:

I don't have a service manual for this model.

Click to expand...

T160 'Factory' manual: http://www.classicbike.biz/Triumph/Repa ... h-T160.pdf

T160 parts book: http://www.classicbike.biz/Triumph/Part ... Manual.pdf

T160 Owners' Handbook: http://www.classicbike.biz/Triumph/Owne ... Manual.pdf

Thank You Gentlemen ! Also,I can see now why I have a small amount of free play in my front brake lever now too. This group is the BEST !

Cheers !

Tim _S