Thick flame head gaskets
- Thread starter confused
- Start date
- Status
Holmeslice
VIP MEMBER
- Joined
- Sep 27, 2009
- Messages
- 495
Hi Confused,
Older style composite gaskets from Andover were .75mm (~.030"), but now they only supply 1mm composite gaskets, which actually measure very close to .040" - very comparable to the thickness of a stock copper gasket.
Or you could go custom one off from Cometic.
-Kenny
Older style composite gaskets from Andover were .75mm (~.030"), but now they only supply 1mm composite gaskets, which actually measure very close to .040" - very comparable to the thickness of a stock copper gasket.
Or you could go custom one off from Cometic.
-Kenny
Deets55
VIP MEMBER
- Joined
- Oct 3, 2013
- Messages
- 1,584
Holmeslice said:
Kenny,
Have you ever used a Cometic head gasket and if so how did it work out? I believe with the older .75 mm composite I am running around 9.1 compression, if I have to use a 1.0 mm gasket I drop down to around 8.5. Something I would rather not do.
Pete
- Status
