How many miles you did with the new dampers by now?DBono said:I had this issue on mine at around 4,000 miles. Was replaced under warranty within a couple of weeks as new wheels were located in SoCal. Got new wheel and tire.
Was told by the factory that some productions of the dampers were not up to spec for rubber quality.
I noticed the issue on my bike as small pieces of rubber were visible protruding from the space between the wheel and spacer.
DBono said:I had this issue on mine at around 4,000 miles. Was replaced under warranty within a couple of weeks as new wheels were located in SoCal. Got new wheel and tire.
Was told by the factory that some productions of the dampers were not up to spec for rubber quality.
I noticed the issue on my bike as small pieces of rubber were visible protruding from the space between the wheel and spacer.
DBono said:I've got about 7,000 miles (3,000 miles more) and no issues since.
Don't think that this is the case. There is not much space between sprocket carrier and where the dampers are...TonyA said:Hello Raphi , Is it possible that the sprocket carrier stubs are not fully engaged into the rubber dampers ? For example is the bearing in the wheel hub not fully driven into the hub ? This might cause the sprocket carrier not to fully engage the buffers. ?