- Joined
- Feb 4, 2008
- Messages
- 66
Hello everbody
can anybody explain me the route of the wiring harness in the front end of the frame ? The gas tank is very close to the frame, so should i route the wires from the handlebar between the two down tubes ( under the steering neck ) or should i go between the big tube and the gas tank ?
Which bolt/ screw should i use for the cylinder head ground wire ( red, approx 10mm loop ) ? valve cover, intake manifold, cylinder head bracket....
A good photo would be nice
Thanks for your efforts
Marco
can anybody explain me the route of the wiring harness in the front end of the frame ? The gas tank is very close to the frame, so should i route the wires from the handlebar between the two down tubes ( under the steering neck ) or should i go between the big tube and the gas tank ?
Which bolt/ screw should i use for the cylinder head ground wire ( red, approx 10mm loop ) ? valve cover, intake manifold, cylinder head bracket....
A good photo would be nice
![Big Grin :D :D](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f600.png)
Thanks for your efforts
Marco