- Joined
- Jun 17, 2009
- Messages
- 642
Hi everyone!
Well, today I rode over to Heinz Kegler's here in New Mexico.
We had a very good time together installing a new crankshaft main seal, along with both tightening and truing the primary belt drive via the
gearbox adjusters.
I did not want to put Heinz through any more than this, so I rode home, and will tackle that stubborn front
gearbox bolt another day. Thanks for the penetrating oil, 7/16 box end, and patience tips.
All in all, a really good time spent working and talking to Heinz. He is really a Norton expert and a good friend to boot!
John
Well, today I rode over to Heinz Kegler's here in New Mexico.
We had a very good time together installing a new crankshaft main seal, along with both tightening and truing the primary belt drive via the
gearbox adjusters.
I did not want to put Heinz through any more than this, so I rode home, and will tackle that stubborn front
gearbox bolt another day. Thanks for the penetrating oil, 7/16 box end, and patience tips.
All in all, a really good time spent working and talking to Heinz. He is really a Norton expert and a good friend to boot!
John