Kick Start position

Status
Not open for further replies.
olympus

olympus

Joined
Aug 5, 2017
Messages
1,470
Country flag
Hi Gents
Squatting down alongside the bike looking directly at the kick start input shaft.... as there is no master spline what is the correct angle that the kick start should be positioned onto the splines....
or isn't there one??
 
As far clockwise as you can without it fouling the footrest on return.. That way you'll have maximum travel when kicking (MK3 owner)
 
Or... back far enough that the lever doesn't dig into your calf. Personal preference.
 
I questioned the same thing. as I recall, most original photos show the bottom edge flange and the foot rubber in a near horizonal position. does that mean it has to be that way - NO

Kick Start position


I have mine set that way, and don't seem to have any problems.
 
Last edited:
maylar said:
Or... back far enough that the lever doesn't dig into your calf. Personal preference.
Click to expand...
from the photo it looks like the kick start pedal runs almost parallel with the horizontal top edge of the Z plate
 
I find it easier to rotate it ccw a little bit so it starts to kick about the 9 oclock position. This gives me maximum leverage when I need it.
Jaydee
 
Status
Not open for further replies.

Similar threads

Mofosheee
Kick start assembly question
Replies
7
Views
435
Mofosheee
Mofosheee
S
Kick Start Lever Issue
Replies
16
Views
868
Onder
Onder
The yaki
Kick-start, first gear ratchet profile ?
2
Replies
32
Views
1,349
mean gene
mean gene
ashman
Had our annual kick start only bike run Sunday with old mates
Replies
5
Views
310
johnm
johnm
jms
Are Atlas and 850 MK 111 kick start splines the same
Replies
3
Views
297
Hortons Norton
Hortons Norton
Back
Top