G15 Roadholder Forks

Joined
Nov 3, 2014
Messages
17
Country flag
Hi All,
I have a G15 MK 2,
It has Roadholder forks.
I need to replace the damper tube top nut .
The one the damper rod slides through.
They look the same as the Commando ones but have a different thread.
Can anyone know where I can buy some .
Cheers Steve
 
Hi All,
I have a G15 MK 2,
It has Roadholder forks.
I need to replace the damper tube top nut .
The one the damper rod slides through.
They look the same as the Commando ones but have a different thread.
Can anyone know where I can buy some .
Cheers Steve

I am guessing you mean the aluminum one? You could check with RGM. I would expect you would need one that is used on an Atlas or Dominator.

John in Texas
 
Check out the thread "Fork damper upgrades by JSM" in the Commando section. You may want to upgrade the caps instead of fitting new ones. Fitting bushes in the aluminium caps is advisable, as steel to aluminium is subject to friction wear despite lubrication. In most cases you will also need new damper rods, especially if they are pitted. They are available from AN (p/n NM15801 according to the part's book).

-Knut
 
Back
Top