1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

G15 Roadholder Forks

Discussion in 'AJS & Matchless' started by 88chips, Mar 30, 2018.

  1. 88chips

    88chips

    Joined:
    Nov 3, 2014
    Hi All,
    I have a G15 MK 2,
    It has Roadholder forks.
    I need to replace the damper tube top nut .
    The one the damper rod slides through.
    They look the same as the Commando ones but have a different thread.
    Can anyone know where I can buy some .
    Cheers Steve
     
  2. N0rt0nelectr@

    N0rt0nelectr@ VIP MEMBER

    Joined:
    Sep 15, 2014
    I am guessing you mean the aluminum one? You could check with RGM. I would expect you would need one that is used on an Atlas or Dominator.

    John in Texas
     
  3. mdt-son

    mdt-son

    Joined:
    Jan 19, 2012
    Check out the thread "Fork damper upgrades by JSM" in the Commando section. You may want to upgrade the caps instead of fitting new ones. Fitting bushes in the aluminium caps is advisable, as steel to aluminium is subject to friction wear despite lubrication. In most cases you will also need new damper rods, especially if they are pitted. They are available from AN (p/n NM15801 according to the part's book).

    -Knut
     
  4. Bob Matthews

    Bob Matthews

    Joined:
    Dec 19, 2016

Share This Page

Loading...