Fitting Landsdowne dampers to N15 roadholder forks

Joined
Feb 23, 2020
Messages
16
Country flag
Hi all,
I have a set of Landsdowne dampers that were fitted to my Commando. I’m just about to finish a N15, and wondered if anyone has fitted them to a standard N15CS front end.
Would there need to be modifications to make them fit?
 
I wrote to the fellow who makes them now inquiring about a set for my G15, which is the same as your machine. He could build them but needed to lengthen the rods that connect up to the top caps, and I believe the threading on the top caps may be different from the commando as well.
 
We had worked out the differences in lengths- Contact Donald Pender. He can likely make the bits for the conversion for you.

Donald Pender <madass140@gmail.com>
 
Back
Top