1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Float Bowl

Discussion in 'Norton Commando Motorcycles (Classic)' started by norton850, Apr 29, 2006.

  1. norton850

    norton850

    Joined:
    Feb 2, 2005
    Help on float bowl height,I've tried the 1/8 drift on the brass sleeve from below to lower the float but scared to punch the drift right through. My floats are about 1/16 higher than the edge of the bowl.Any sugestions.
     
  2. norbsa48503

    norbsa48503

    Joined:
    Apr 7, 2004
    Soak em in very hot water first. Be happy with small amounts of movment. This is a good use for that toy hammer you have. Hope you have the Viton tiped bits before making this adjustment.
     

Share This Page