lcrken
VIP MEMBER
- Joined
- Mar 15, 2009
- Messages
- 5,035
Just got these back from comnoz, who did his trick machining to reduce the shank diameter. They are ARP high strength stainless bolts. The head bolts are unmodified except for Jim's treatment. The cylinder through bolts have also had the head flange turned down to fit the counterbores in the cylinder, and are shortened to the proper length. The standard through bolts are the stock length, but the ones for the 75 mm short stroke are two different lengths, because one pair of them sits on top of the cylinder instead of in a counterbore, and they are also a different length to fit the shortened cylinders that allow stock length rods. Pretty, pretty.
Ken
Ken
