Custom Wiring

Status
Not open for further replies.
kwb210 said:
You are switching to negative ground, what is involved? And I am asking this with the view that you are doing your own wiring loom not using a stock loom. Maybe there is no difference? I've got my new loom all installed but no battery yet. Can I just switch from positive to negative?
thanks!
Kurt

The best way is to junk the zener and rectifier and fit a modern rectifier/regulator like a Podtronic, switch the battery leads then as long as you don't have anything polarity sensitive like an electronic ignition, you are set. If you do have an electronic ignition, you will need to switch a few wires, but nothing serious. After that, you can use LED bulbs without hunting the elusive ones made for positive ground.

Jean
 
Status
Not open for further replies.
Back
Top