clock pod / dial orientation

850cmndo · 2026-02-14T09:00:40-0700

olympus said:
And if you have OCD..... the scale of the problem intensifies significantly, Don't get me started on how i have to align all the slots in slotted woodscrews

Electrical wall plates MUST have the slotted screws vertical. There...I said it.

kommando · 2026-02-14T10:22:52-0700

The fix is to use wider spacers each side of the headlamp shell, then the cables do not rub on the headlamp mounts when its all setup to please the OCD challenged. But then the parts are not ex factory which brings different OCD challenges

Andy Higham · 2026-02-14T10:31:18-0700

" But then the parts are not ex factory which brings different OCD challenges "
I don't have any problems with non factory. Bike factories threw bikes together as cheaply as possible, I prefer to build a bike as Good as I possibly can

marshg246 · 2026-02-14T11:04:14-0700

Wow! I thought I was anal, you guys....

I got scolded at a show (that I took first place Norton) for having the covers (06.5108) on the bottom of the older style instrument cups yet no one noticed that my yokes were powder coated black as was my rear brake pedal and some other things!

olympus · 2026-02-14T12:11:12-0700

850cmndo said:
Electrical wall plates MUST have the slotted screws vertical. There...I said it.

You are so on the money sir

robs ss · 2026-02-14T13:23:31-0700

Fast Eddie said:
This thread has made me realise that my mental health perhaps isn’t so bad after all. Comparatively speaking…

Comparing yourself to the bottom of the pile isn't a good strategy - unless you're desperate!

Fast Eddie · 2026-02-14T14:27:58-0700

robs ss said:
Comparing yourself to the bottom of the pile isn't a good strategy - unless you're desperate!

I am.

clock pod / dial orientation

850cmndo

kommando

Andy Higham

marshg246

olympus

robs ss

Fast Eddie

Similar threads