DogT said:I have a thin tappet spanner that fits very perfectly in the larger one. I forget what I use on the smaller.
Went out and got a couple of large washers, ground down one side, used a pair of vice grips and now have an effective tool that cost about $.50.concours said:A large ( like for a 3/4 and 1" bolt) flat washer and an adjustable wrench is a great way to NOT tear up the slot.
wjrich said:Went out and got a couple of large washers, ground down one side, used a pair of vice grips and now have an effective tool that cost about $.50.concours said:A large ( like for a 3/4 and 1" bolt) flat washer and an adjustable wrench is a great way to NOT tear up the slot.
Once again, good advice here.