1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Assist/advice questions

Discussion in 'Norton Commando Motorcycles (Classic)' started by Blkbird, Dec 27, 2005.

  1. Blkbird

    Blkbird

    Joined:
    Aug 18, 2005
    As I am in the process of rebuilding my other Norton- the winter project is on and the wife is mad as sh%#t cuz there's parts all over the basement floor-I am running into a little problems and could use some advice.So here goes.
    1)where could I a new set of rings for the Dunstall 810 kit- I broke a couple while trying to take them out
    2)do they sell only the screen for the petcocks and how would they be secured to the petcock
    thanx in advance
     
  2. L.A.B.

    L.A.B. Moderator VIP MEMBER

    Joined:
    Nov 20, 2004
    Ron L mentioned British Cycle Supply here:
    http://accessnorton.com/norton/viewtopic.php?t=832

    Not that I know of (in the UK anyway).
    If they are the plastic/gauze type then they normally just push in by hand.
     

Share This Page