Anyone used this wheel chock?

[Bonzo]

Workshop :: Workshop Equipment :: Fittings & Lifts :: Motorcycle Wheel Chock

Wheel Chock Tubular wheel chock supports front wheel of bike during storage and transit. Fully adjustable to fit wheels 15" to 19". Features pivot clamp which locks the front wheel securely by the bike weight. Simply wheel the bike onto the chock and the

www.feked.com

(For a 19" wheel Commando)

 

[SteveBorland]

Workshop :: Workshop Equipment :: Fittings & Lifts :: Motorcycle Wheel Chock

Wheel Chock Tubular wheel chock supports front wheel of bike during storage and transit. Fully adjustable to fit wheels 15" to 19". Features pivot clamp which locks the front wheel securely by the bike weight. Simply wheel the bike onto the chock and the

www.feked.com

(For a 19" wheel Commando)

I have similar one, used in the workshop, in the van and at the track. Works well, holds the bike ok but of course don't push it sideways much, it's only the spokes holding the whole plot in place.
Used it with both the bevel Ducati and the Norton. Works well in a van, since you can have both hands free to do the tie-downs, instead of trying to hold the bike up with one hand.

One other thing though - if you use it immediately after a track session, the warm rubber on the tyre does stick to the clamp, making the next removal an interesting experience, especially if you happen to be a bit late...

I'm told it was rather amusing to watch though

 

[Bonzo]

Cheers for that, Steve.

No fear of me going on a track session mate