961 Primary Breather Kit

[205Rallee]

Anybody know where I can get a 961 Primary bolt breather kit. Motorvated appears closed and the only other kit I can find is in Canada. No Norton dealers around here. The other option is to drill and tap the existing bolt and fit a swivel joint myself but not keen on drilling through it. Can I just leave the bolt loosish. Just don’t want to blow all the gaskets straight away.

 

[kev]

I’d wait until Stu’s back and order from him. Definitely wouldn’t leave it loose

I HIGHLY doubt you’ll blow gaskets in the mean time

 

[Beeman john]

Anybody know where I can get a 961 Primary bolt breather kit. Motorvated appears closed and the only other kit I can find is in Canada. No Norton dealers around here. The other option is to drill and tap the existing bolt and fit a swivel joint myself but not keen on drilling through it. Can I just leave the bolt loosish. Just don’t want to blow all the gaskets straight away.

Hi I drilled a hole in the bolt then threaded it and fitted a 90deg fitting with a small diameter air pipe fitted works ok . Motorvated will be closed till after end of July due to a bereavement