Hi All.
Where do you fit the gearbox spacer?.
On my N15 i had fitted only one on the right side of the bottom stud.
Thanks for help.
Piero
Hi Piero,
03-0250 Spacer (7/8 X 7/16 x 0.150") goes at the top gearbox bolt (030234), at the outside of the timing side engine plate.
No spacer at the bottom pivot stud.
I hope this helps.
-Knut
Knut,A spacer 0.15 long is essentially a washer, but it is listed as a spacer. Sorry, my brain was at rest, it goes on the inside between gearbox lug and timing side engine plate. My posting above has been altered.
-Knut