Rear paddock stand bobbins

[Z1000elderado]

Guys, I am looking to order rear paddock stand bobbins for the dominator naked when it eventually arrives,but what is the thread in the swing arm?
Cheers.

 

[glb]

Guys, I am looking to order rear paddock stand bobbins for the dominator naked when it eventually arrives,but what is the thread in the swing arm?
Cheers.

They re the same as Yamaha ones. I can check in the morning for you

 

[Z1000elderado]

They re the same as Yamaha ones. I can check in the morning for you

Cheers that would be great, just wanting everything here so I can fit everything at once and there are so many variations in threads .

 

[glb]

Fairly sure from memory they are M6 size. Just checked R and G https://www.rg-racing.com/browsebike/Norton/Commando_961_Sport/2015/CR0006/#prettyPhoto

 

[MxMartin]

Fairly sure from memory they are M6 size. Just checked R and G https://www.rg-racing.com/browsebike/Norton/Commando_961_Sport/2015/CR0006/#prettyPhoto

The 961 Commando are M6 as well. Best to also check width of bobbin to ensure it doesn't foul exhaust mount bolts etc

 

[Z1000elderado]

The 961 Commando are M6 as well. Best to also check width of bobbin to ensure it doesn't foul exhaust mount bolts etc

Thanks.

 

[skinthespin]

Hi,

The bobbins come with the bolts. If you order a paddock stand it should come with bobbins and bolts too.

HTH

 

[mentalrental]

Be aware that the thread on the swing arm will be full of paint, (mine were) So take it easy first time in. May even be worth running a tap through first.

 

[Voodooo]

I have bobbins on my commando and not on my Dominator.
What I actually prefer to do is just use a large bolt or a length of bar on each side of the hollow axle shaft. Unless of course you’re removing the wheel.