Wanted
Wanted centre stand that fits on the engine plates
Amy condition as I will need to cut and modify
UK only please
Need original parts for a 1951 Norton International , however many single cylinder cycle parts interchange. I would like to find correct used...
I need one to use for some exhaust pipe welding, so the worse shape the chrome is in the better, as it'll need to get stripped off anyway. Threads...
Looking for a carbon fly screen and the mounts.
Hi,
I‘m looking for a basket case, barn find, neglected project. My preference would be an 850 with a RH shift, but I’m open to all models...
Looking for a slimline seat or base for my 1962 model 50 please David
Looking for center stand, side stand and mounting bracket, fork sliders, z-plates. Shipping will be to California 90503. Thanks.
Looking for a serviceable Commando seat pan. Dont care about the cover or foam. Ideally an Interstate but a Roadster would work. I am in NZ.
Looking for an older Moto Guzzi Super Sport or Daytona Must be red. Was one on Ebay and the guy didn't sell and of course ebay blocked me from...
Hi, anyone have an old Ewarts petcock lying around. I need the pipe that fits inside the brass mesh filter, off my 1962 Model 50, thanks
Not fussed how knackered it is ie broken mounts, damaged glass/perspex etc...as long as the inlay face bit with the numbers in is good.
Let me...
Looking for a 2 into 1 intake manifold for an upright Norton twin, (not for a leaning forward Commando engine). Doesn't have to be perfect, just...
I just need one of the longer ones.
Looking for the original versions with the correct angle out of the head.
Looking for a used one complete or just the backplate but must be straight and with the switch bracket still attached. '71+
Looking to buy a lower yoke in good shape. No bent or torn steering stop lugs please.
Wanted a right foot peg for 1947 International doesn't have tp be perfect going on a bitsa
961 Km Speedo face wanted ( not the MPH / tiny Kmh version). Or complete Kph speedo if the price is right.
