Wanted
- Wanted
- Expired
Looking for a set but without the Lansdowne written up top. Just C and R.
Anyone who has sold their bike or switched to cartridges want to sell...
- Wanted
- Expired
Looking for ‘70 Commando S side covers, headlight mounting ring. side stand and mounting bracket. Shipping to California.
- Wanted
- Expired
Wanted centre stand that fits on the engine plates
Amy condition as I will need to cut and modify
UK only please
- Wanted
- Expired
Hi,
I‘m looking for a basket case, barn find, neglected project. My preference would be an 850 with a RH shift, but I’m open to all models...
- Wanted
- Expired
Looking for a serviceable Commando seat pan. Dont care about the cover or foam. Ideally an Interstate but a Roadster would work. I am in NZ.
- Wanted
- Expired
Looking for an older Moto Guzzi Super Sport or Daytona Must be red. Was one on Ebay and the guy didn't sell and of course ebay blocked me from...
- Wanted
- Expired
Hi, anyone have an old Ewarts petcock lying around. I need the pipe that fits inside the brass mesh filter, off my 1962 Model 50, thanks
- Wanted
- Expired
Not fussed how knackered it is ie broken mounts, damaged glass/perspex etc...as long as the inlay face bit with the numbers in is good.
Let me...
- Wanted
- Expired
Looking for a 2 into 1 intake manifold for an upright Norton twin, (not for a leaning forward Commando engine). Doesn't have to be perfect, just...
- Wanted
- Expired
Looking for a used one complete or just the backplate but must be straight and with the switch bracket still attached. '71+
- Wanted
- Expired
961 Km Speedo face wanted ( not the MPH / tiny Kmh version). Or complete Kph speedo if the price is right.
- Wanted
- Expired
Looking for a slimline seat or base to suit a 1962 model 50/ES2 thanks David (Australia)
- Wanted
- Expired
Any condition. But the oil seal and retaining thread area must be in good shape.
Contact
jim@jsmotorsport.com