Wipac Triconsul switch series 192

fireflake · Dec 21, 2015

Apologies in advance as I know there is a lot of info' on this subject but I've been able t buy a new switch and wiring for my 1969 'S'. There are 4 wires Black/Brown, horn, Blue/white/Red/white/ h/ lamp and solid Blue power? There is a bridge wire and a spare terminal, does anyone know if this was designated a purpose, cheers, David

pierodn · Dec 22, 2015

Hi.
Is this a original Wipac Triconsul or an after market Tricon?
Ciao
Piero

fireflake · Dec 22, 2015

Hi, the switch I bought was a new, genuine Wipac Triconsul switch, David

kommando · Dec 22, 2015

Wiring diagram here

wipac-triconsul-switch-t22115.html

rivera · Dec 22, 2015

Just wanted to link that, too.
I added the link wire, everything works fine so far!
There was no extra terminal in my case.
Greets
Uli

pierodn · Jan 28, 2016

Please,
I do not have a Wipac Triconsul switch for my 1969 S.
I have some difficult to fit a Wipac Tricon.
Can anyone help me to figure out how to mount a Tricon instead of a Triconsul?.
Thank you.
Piero

rivera · Jan 30, 2016

Hi Piero !
Look here:
triconsul-switch-t2252.html

pierodn · Feb 1, 2016

Hi.
As Ron L says you can use a Tricon but you cannot use the red kill swithc botton and leave the wire free.
If you are able you can turn the red kill switch botton in the high beam flash (pushing not on the ground but on the high beam wire connection).
I will try to do it.
Ciao.
Piero

Wipac Triconsul switch series 192

Similar threads