I couldn't find a button stocked in the states so I made one out of a bolt. Trial fitted the switch, had to get another switch as the one I was going to use was not consistent. It seems the bad one had an open end between the wire connections, inside you can see the plunger moving in and out. I would guess dirt build up in there is causing problems. The other switch had a black plastic piece covering that area and tested OK. Funny, the grade 5 bolt I used had marks in its polished dome only after a few times trying the switch in the trans.
The Access Norton Website uses cookies to keep you logged in if you register.
By continuing to use www.accessnorton.com, you are consenting to our use of cookies.