Warning light shield

I have searched to no avail and botophucket is holding so many pics blurred hostage, I just have to dredge up an old thread; What is the order, left to right, of the green-yellow-red warning lights?

from the top of the bike - left to right - red ignition warning with shield, amber direction flasher without shield, green high beam indicator with shield.

Thank you. Had been meaning to put that in order for the rivety types.

Onder said:

The 2W bulbs are not bright enough in full sunlight. I put the cups on all three in a vain attempt to actually see when Ive
left the indicators on. I do this all the time as an old timer Ive never had indicators before. Hard to adjust to new things when
old!
Is there an LED replacement with enough power to obviate this?

Click to expand...

Yes, I use LEDs for all three. The turn signal won't work by simply installing an LED - you also need two diodes. Also, you have to reverse the wires as they are not positive ground. I use LEDs that match the color but white ones work too. The color LEDs are nice, especially if the jewels are faded.

If anyone is interested in knowing how to wire the turn signal indicator PM me and I'll show you. Also, I have a small stock of colored and white that I can't give for free, but will for my cost to anyone who PMs or emails me (as long as I have them).

I buy them from https://www.superbrightleds.com/

Also, they have LEDs that will replace the speedo/tach lights that are bright enough to see the face at night. As long as you have two wires to your socket and can reverse them they will work.