Throttle position sensor

Joined
Dec 14, 2017
Messages
57
Country flag
What’s the procedure for resetting throttle position? The bike will start and idle but won’t rev.
 
Joined
May 31, 2019
Messages
9
Country flag
When you try and rev does the engine cut out?

You may have an issue with your MAP sensor, newer ones have a green mark on them.
 
Joined
Dec 14, 2017
Messages
57
Country flag
When you try and rev does the engine cut out?

You may have an issue with your MAP sensor, newer ones have a green mark on them.
Yes as soon as you touch the throttle it cuts out. It stopped on me at about 30 mph, there was a tiny misfire then it died. Where is the MAP sensor? The big problem is I’m at the TT and need to ride home next Saturday.
 
Joined
May 31, 2019
Messages
9
Country flag
Yes as soon as you touch the throttle it cuts out. It stopped on me at about 30 mph, there was a tiny misfire then it died. Where is the MAP sensor? The big problem is I’m at the TT and need to ride home next Saturday.
Assuming it is a commando... what year is it?
It should be bolted above the throttle bodies.. I can send you a picture of exactly where tomorrow...
 
Joined
May 31, 2019
Messages
9
Country flag
My 2013 doesn't have a MAP sensor, although the manual refers to one. Can they be retro-fitted with an SC ECU?
Sorry I missed this one before..
I don't believe it is as simple as that, thinking just loom wise and the bridging loom for the ECU as I am sure the pins are different. I can message you more on it tomorrow.
 
Joined
Dec 14, 2017
Messages
57
Country flag
Assuming it is a commando... what year is it?
It should be bolted above the throttle bodies.. I can send you a picture of exactly where tomorrow...
Yes commando, 18 plate. I think I’ve found the MAP, is it a generic part that might be available on the Isle Of Man?
 
Joined
Jan 16, 2015
Messages
3,151
Country flag
My 2013 doesn't have a MAP sensor, although the manual refers to one. Can they be retro-fitted with an SC ECU?
I don't know why you would want one . There is enough to go wrong as it is. You can always opt for the Norton Euro 3 New Omex upgrade . I think all of the new features will be included with that , solid state tilt switch assy etc..
 
Last edited:
Joined
May 31, 2019
Messages
9
Country flag
Yes commando, 18 plate. I think I’ve found the MAP, is it a generic part that might be available on the Isle Of Man?
If you can take it off you may be able to match one up... the pipe can be a sod to get back on mind...
 
Joined
Dec 14, 2017
Messages
57
Country flag
Ash, I’ve spoken to the guys in the race truck and they said send one ASAP to them at the paddock and also give one to Stuart as he is coming over on Wednesday. They are going to have a look at it and fit the MAP.
 
Joined
May 31, 2019
Messages
9
Country flag
Ash, I’ve spoken to the guys in the race truck and they said send one ASAP to them at the paddock and also give one to Stuart as he is coming over on Wednesday. They are going to have a look at it and fit the MAP.
Hey Stratos - If you could call me ASAP on 01332 811988.
 
Joined
Jan 5, 2014
Messages
2,479
Country flag
Ash, I’ve spoken to the guys in the race truck and they said send one ASAP to them at the paddock and also give one to Stuart as he is coming over on Wednesday. They are going to have a look at it and fit the MAP.
Man. I live on the wrong side of the Atlantic. That's great of them to take the time to help.
 
Joined
May 13, 2019
Messages
6
Country flag
Ash, I’ve spoken to the guys in the race truck and they said send one ASAP to them at the paddock and also give one to Stuart as he is coming over on Wednesday. They are going to have a look at it and fit the MAP.
Would you please send me a pm with your reg info?
 
Top