Spare fender anyone?

Status
Not open for further replies.
Joined
Jul 18, 2004
Messages
327
Hey there,
Does anyone have a spare front fender they are interested in selling? The PO cut off the front of the fender at 45 degrees...
Spare fender anyone?

or perhaps a mangled fender kicking around that I can cut off the front and braze it onto mine?

Phil
 
Phil,

Would that be the narrow chrome one (060583), the wide chrome one (062328), or the stainless steel (063175)?
 
Hi Ron,
The fender is 41/2" chrome. Not sure which part no. that is, do you have any ideas?
 
It's probably the narrow one used with the 3.60H-19 front tire. If a 4.10H-19 K81 will fit without rubbing, then it's the wide one. Narrow was used '68-'70 or '71 when they started mounting the 4.10 front and rear. Can't help with that one as I have no spare.
 
Hi Ron,
I am not sure how to match your numbers with what I have. The tire (Avon Speedmaster MKII) says 3.25-19 (inches) The rim (Dunlop - steel) has MB.41 and WM2-19 stamped on it.

I will be heading off to the annual Vintage rally/swap meet in Paris Ontario (near London), so I might find one there.
 
Status
Not open for further replies.
Back
Top