Silicone rocker cover gaskets

robs ss said:

ahem! ... with Yorkshire accent...

"Cardboard? You could afford cardboard? Luxury... luxury!, You tell young people that these days and they won't believe you!"

Click to expand...

I pulled a Norton motor down once and timing cover you could still see the cornflakes box print on one side of the gasket lol, but after 10 years it was leaking and was done by the original owner, never the person asking me to fix a few oil leaks. or people who over use silicone on gaskets and wonder why they have a oil supply problem, some rough nuts around but hey I done a few bodge jobs just to get back home but never on the Norton, honestly.

Ash

I have used K&W Copper Kote on paper and fiber gaskets for many years. Always the brush on variety not the spray. Never hardens and the rocker box covers are easily removed without damaging the OEM style gaskets which can be recoated and reused without leaks.

On a ride just recently, I lost a front tappet cover along with the studs and all. For that reason, I would not use a silicone gasket as mentioned in an earlier replay, you cant tighten them too much or they will bulge out. This was the first time I had a problem. Previously, and now, I don't have a problem with the original gaskets, done up correctly.

ashman said:

I pulled a Norton motor down once and timing cover you could still see the cornflakes box print on one side of the gasket lol, but after 10 years it was leaking and was done by the original owner, never the person asking me to fix a few oil leaks. or people who over use silicone on gaskets and wonder why they have a oil supply problem, some rough nuts around but hey I done a few bodge jobs just to get back home but never on the Norton, honestly.

Ash

Click to expand...

Was part of the pit crew of a 7R AJS at the IOM Manx two years ago. The motor had been assembled by a named builder but some person had changed out the magneto and taken off several covers and spread black RTV everywhere. I recomended to the owner the motor be stripped but he decided no.

Lasted 1.5 laps of practice and stopped with a seized big end. Stripping of the motor revealed the big end feed, cam feed and piston cooling feed all blocked with RTV.

You can use it. But carefully. I only use it on chaincases really where it can't do any damage. Hi temp rtv on Norton exhaust rings is brilliant.

I use JSs gaskets on my Commando. The whole motor and gearbox don't leak a drop..Only leak is from the swinging arm.

RTV is good for bathrooms and laundries