RGM folding kickstart pedal.

Fast Eddie said:
The T160 lever (when fitted to the T160) had a leaf spring fitted that held the leaver in place. Is it not possible to fit one to the RGM version ?
Click to expand...
I posted this last year - does just as good a job as that spring...
Cheers

robs ss

Thread 'Maintenance Tips & Tricks'

In another thread our good, and now sadly departed, friend Texas Slick (Rob) started on Tools You Have Made.
I thought one on maintenance hints might be appropriate. I've put this in the Commando section to manage volume and line of interest. Other forum areas may like to follow suit if desired.

I'll start the ball rolling with a small one (because I've just done it!):
To keep the lower pivot on my long RGM kickstart tight and moving smoothly I do two things.
1.Insert a thin belleville spring between the upper boss and the arm to apply some spring tension here. (22.5 x 11.2 x 0.6mm on...
  • Like
  • Thumbs Up
 
About 6 months so far, but I've now fitted a CNW starter so the kickstart doesn't get used. But, it now stays in place very nicely. I think the belleville washer cost about 45p
 
MichaelD said:
About 6 months so far, but I've now fitted a CNW starter so the kickstart doesn't get used. But, it now stays in place very nicely. I think the belleville washer cost about 45p
Click to expand...
Mine has lasted one season so far on the same kicker and I have a bag of them if needed.
 

Similar threads

Cuppy
RGM folding kickstart lever not fitting
2 3
Replies
47
Views
4,977
Cuppy
Cuppy
zotz
  • Locked
RGM folding kickstart measurement
Replies
2
Views
994
kommando
kommando
Dellis
  • Locked
RGM Folding Kickstart Lever
2
Replies
21
Views
5,872
ashman
ashman
pantah_good
  • Locked
Norvil reversed lever rearsets / RGM folding kickstart combo?
Replies
17
Views
2,870
pantah_good
pantah_good
J
  • Locked
RGM folding kick start with Madass140 dunstall replica rearsets?
2
Replies
22
Views
6,487
joshtjeerdsma
J
Back
Top