Points cover

T

TwoBellies

Joined

Feb 11, 2007

Messages

6

• Feb 11, 2007

• #1

Hello to you all, I am new to this forum and I was wondering if any of you could help me locate an item please. I am looking for a smooth points cover for a Norton Commando in very good condition.

Regards,
Ian.

 

L.A.B.

Moderator

VIP MEMBER

Joined

Nov 20, 2004

Messages

20,415

• Feb 11, 2007

• #2

Hello Ian,
You should be able to get one from any good Norton parts supplier.
Unfortunately you do not say where you live so that makes recommending a local supplier rather difficult!

So if you are in the UK?

Then try
Norvil: http://www.norvilmotorcycle.co.uk/

or RGM: http://www.rgmmotors.co.uk/

BSA Regal (Andover Norton): http://www.bsa-regal.co.uk/norton/parts ... 04&Part=19

or Mick Hemmings (no website) phone: 01604 638505

 

T

TwoBellies

Joined

Feb 11, 2007

Messages

6

• Feb 11, 2007

• #3

Cheers mate. I live near Swansea, South Wales. I will contact the contacts you have given me ASAP.

Ian.

 

7

79x100

Joined

May 19, 2006

Messages

1,612

• Feb 11, 2007

• #4

It might be pointing out the obvious but the standard points cover doesn't fit over a Lucas RITA pick up which means either turning up a spacer or else using their rather insubstantial spun cover if you've got one of those fitted.

 

T

TwoBellies

Joined

Feb 11, 2007

Messages

6

• Feb 11, 2007

• #5

I am sorry but I really dont know what you are on about. If you supply me with your E:mail address I can send you a photo showing why I am after one of these covers.

Ian.

 

kommando

Joined

May 7, 2005

Messages

7,158

• Feb 12, 2007

• #6

TwoBellies, if you have std points or boyer ignition then the std cover will fit, if you lucas rita ignition then you need a cover that has more clearance as the rita needs more room. Its very doubtful you have lucas rita ignition.

 

T

TwoBellies

Joined

Feb 11, 2007

Messages

6

• Feb 12, 2007

• #7

Right, I see what you guys are on about now. This does not apply to me as I do not have any points at all. My timing cover is not on a bike, but is mounted on a plaque as a wall decoration. Thanks for your input anyway.

Ian.