Photos
- Thread starter pierodn
- Start date
- Status
First, you have to upload your pics to a photobucket (or similar) account - its free.
Then note the link of the pic there, and paste it between the
Img Img thingies - just click the Img button above.
It will be something like
http://i419.photobucket.com/albums/noth ... 1262-2.jpg
(this is a nonsense one)
and once the [img img] are either side of it, it will display here automatically.
Then note the link of the pic there, and paste it between the
Img Img thingies - just click the Img button above.
It will be something like
http://i419.photobucket.com/albums/noth ... 1262-2.jpg
(this is a nonsense one)
and once the [img img] are either side of it, it will display here automatically.
- Joined
- Nov 20, 2004
- Messages
- 21,112
pierodn said:
Technical Information & How To Post Photos: technical-information-how-post-photos-t2357.html
- Joined
- Nov 20, 2004
- Messages
- 21,112
http://s1284.photobucket.com/albums/a56 ... ae02eb.jpg
I can try to attache only this, not the photos!!!!!!
I can try to attache only this, not the photos!!!!!!
Well,
The photo is not reverse!
Is left, is left, i made by my hands, it was not very difficult, only cut and soldering and recroming!
I am rebuilding a fatback 1971 with the rear swing harm of 1975 ES with rear disc but with the original right gearbox lever.
The photo is not reverse!
Is left, is left, i made by my hands, it was not very difficult, only cut and soldering and recroming!
I am rebuilding a fatback 1971 with the rear swing harm of 1975 ES with rear disc but with the original right gearbox lever.
Excellent! Thanks Les.
I turned of 180degree the master cylinder but u cutted off the up (ex under when was on right) connection because it was not possible to put on the reservoir (the under attachment when you turn up it goes to ahead!) and i fitted the rear of master cylinder with a stainless steel clip like those to fix the grab.
*
I turned of 180degree the master cylinder but u cutted off the up (ex under when was on right) connection because it was not possible to put on the reservoir (the under attachment when you turn up it goes to ahead!) and i fitted the rear of master cylinder with a stainless steel clip like those to fix the grab.
*
- Joined
- Aug 1, 2011
- Messages
- 476
pierodn said:
To get those pictures to display, simply highlight the link to them, then click on the Img button above the post. It will put the img markers before and after and then it will display. For the posts that are already there, simply edit them to put in the img markers.
- Status
