- Joined
- Oct 28, 2014
- Messages
- 1,860
Dual Amals
The two inboard carb flange bolts...how far apart are they center to center? After years of battling the carbs on and off I use button head allens instead of the studs in the manifolds and using a T-handle ball driver cut and welded to the proper length, the carbs are now easier to R&R. To make it even easier I want to cut a piece of 5/16" stock, drill and tap it 5/16 - 18 twice...one dual nut, two carburetors. If I make it tall I can hold it (barely) with my fingers and thread in the bolts.
I used to do this job by removing the manifolds with the carbs but this will be easier.
The two inboard carb flange bolts...how far apart are they center to center? After years of battling the carbs on and off I use button head allens instead of the studs in the manifolds and using a T-handle ball driver cut and welded to the proper length, the carbs are now easier to R&R. To make it even easier I want to cut a piece of 5/16" stock, drill and tap it 5/16 - 18 twice...one dual nut, two carburetors. If I make it tall I can hold it (barely) with my fingers and thread in the bolts.
I used to do this job by removing the manifolds with the carbs but this will be easier.
